Botron recommends their B8300 series Cleanstat concentrated floor cleaner.  This concentrated floor cleaner will rejuvenate and improve your static dissipative floor system.  It will improve other types of floor surfaces, like tile and epoxy.  Coverage when diluted 10-1 ratio is over 2000 sqft.

This unit is specifically designed to clean shoes where employees or visitors enter into your office, warehouse, or work area directly from outside or from a dirty work area.  The unit  is designed to handle all types of dirt such as mud, leaves, grass clippings, slush or sand.  Used properly the Bull Dog could significantly reduce your annual maintenance costs for high traffic areas where dirt is a concern and will enable you to protect your expensive floors and carpets from damage.  Unit must be placed indoors in a hall or entryway.  The unit cannot be placed outside; meant for indoor use only. 

Features:
-    Designed for cleaning large construction boots and shoes.
-    ¼ horsepower 115V/60hz single phase motor
-    Total power requirement including vacuum is 12.4 amps
-    Shoe Brush (5.4 amps) Vacuum (7.0 amps)
-    System protected by a 15-amp breaker
-    16 gauge stainless steel housing
-    A user operated push button switch turns on the machine when depressed  and shuts the system down when released.  The vacuum should be plugged directly into the Bull Dog and will be activated when push button is used.
-    Shafts are carbon steel electroless nickel-plated design to reduce corrosion
-    Easy installation, plug into a standard 115V/60hz single phase outlet
-    Rotating heavy duty nylon brushes for cleaning (non abrasive)
-    User can perform preventative maintenance
-    System comes with a 6’ power cord ready to plug in
-    Size: 16”Wx21”Lx44”H
-    Unit is shipped with Operations Manual and complete parts list
-    Warranty: One year from date of invoice against defective workmanship and all parts except belts and brushes

OPTIONS FOR BULL DOG:

Option #1  #AS-10 Hepa Vacuum (includes one bag)

........add$ 715.00 each

(Item code: 20-2409     one week lead time)

Option #2  #610W Wet/Dry Vacuum with hose, Non-Hepa....add$ 732.00 each 

(Item code: 20-2344 four week lead time)

The automatic sensor unit activates the shoe brush machine with the foot is placed in the opening. The unit incorporates a 99.99% efficient HEPA filter exhaust system that prevents particles from reentering the surrounding area and captures heavy contaminants in a convenient pull out drawer.

The unit is self contained with a built in vacuum system; a timing belt drive between the gear motor and bottom brush assembly.

Features:
- Totally enclosed fan cooled gear motor
- Round belt drive for the top brush
- Four motor driven brushes
- Floating, weight loaded, top brush
- Stainless steel base plate
- Dirty HEPA filter warning light
- Positive, easily adjustable time belt tension
- Easily removable dust drawer and contamination bag
- Easily removable filter
- Heavy duty construction
- Operating noise with blower, vacuum and gear motor is 55 dba
- Water resistant
- 7’ power cord
- 120v/60HZ
- 18 ½” x 28” x 39”
- 135 lbs. Ship weight

The 2010 SC unit comes with a special energy conserving switch that activates the unit. The motor shuts off automatically when the foot is removed from the unit. No other shoe cleaning machine available offer such power, cleaning ability and convenience.

Please contact Indoff for further information on this and other clean room products.

BEVCO combines function with style throughout its complete line of beautiful spce-saving coat rack systems. There is a sturdy-built rack to fit every need and budget. They are made of full 1" round, 18 ga. tubular steel and come in a bright chrome finish for years of dependable service. Single and Double shelf models are available in standard 2, 3, 4, 5, and 6 ft. lengths.

Series 100/Single Shelf - This versatile and adaptable rack fits most every need. Unit accommodates optional open or closed hook hangers.

Series 200/Double Shelf - Larger capacity unit has two shelves and mounts easily in minutes.

Please contact Indoff for further information on this product.

Get maximum protection with the Tacky Mat for foot borne contamination. Each sheet has a strong adhesive coating that removes dirt on contact. The 10-7005 provides the most economical way to meet cleanroom needs.

Several years ago, Eastman-Kodak performed a study on the efficacy of Tacky Mats® and found that a person stepping one time on a Tacky Mat® will remove approximately 55% of the friable, or potentially airborne, particulates from the bottom of the shoe. If the individual steps on the Tacky Mat® five times, as much as 95% of the friable particulate will be removed.

This product protects sanitary conditions in cleanroom areas. Each mat consists of 30 disposable sheets. When the top sheet becomes soiled, simply peel off to expose a new, clean surface. Tacky Mat® installs in seconds and can last up to weeks at a time depending on the amount of traffic. No frame is required; adhesive strips stick or full width backing adhere the Tacky Mat® in place on the floor.

Tacky Mats® are specified in a variety of applications, including semiconductors, nuclear, pharmaceutical, electronic devices, computer, aerospace, biotechnology, laser optics, medical devices, plastic/rubber, automotive, defense contractors, food processing, biologicals, university laboratories and hospitals.

Tacky Mats® are available in a variety of sizes (up to 3' x 5') and colors. Mats may be either 30 sheets per mat or 60 sheets per mat and are shipped as either 120 or 240 sheets per case.

Tacky Mat® is a registered trademark of LIBERTY INDUSTRIES.

Other sizes and colors available, please contact Indoff for further information on this other clean room products.

Liberty offers a portable entrance mat designed to remove small dirt particles and dust from shoes. When the top sheet is dirty, simply peel off and throw away. Refills are easy to install and available in 60 sheets. Frame and mat have a total thickness of 1/4". Frame is constructed of ehite hi-impact polystyrene w/ a non slip backing adhered to the back of the frame. This makes it easy to use the product in and application and can easily be picked up and moved. The mat size is 24"x30".

Replacement Sheets also available on this site.

Please contact Indoff for further information on this and other Clean Room products.

Replacement mats are available in case quantities of 4 mats/case-60 sheets/mat.

Please contact Indoff for further Information on this and other clean room products.

Long Life Coil Cord

All of Botron’s coil cords are designed for extended use and built withstand the labors of the work environment. It can be used in many applications from bench to personal grounding. It’s non-tangle and high retention coil make this a great choice for a hassle free path to ground

Features:

• Black and Green coil cords in 6′ and 12′ lengths
• 30 Lb. tensile strength
• Spring contact banana connector
• 1/8″ (4mm) and 1/4″ (7mm) sockets available
• 1 Meg Ohm resistor
• Custom configurations available

GEM Coil Cord

Features: “GEM” Translucent coil cords offered in two colors: Emerald green and Ruby red.

• Matching Emerald and Ruby Wrist straps
• 30 Lb. tensile strength
• Spring contact banana connector
• 1/8″ (4mm) socket
• 1 Meg Ohm resistor

Available in lengths of 6' and 12' with either 1/8" or 1/4" snaps.

Please contact Indoff for further information on this product.

This product was designed for protection against Electro-Static Discharge.   The rubber mat is conductive for a rapid discharge to ground.  These anti-fatigue mats are scientifically and ergonomically designed to reduce strains, pains, and worker's compensation claims related to prolonged standing.

These private label Ortho ESD mats are of the highest quality in the industry.  These mats will deliver increased efficiency and reduce injury.  This orthopedic wonder is a high performance mat for higher performance stand up workers.

This mat features:

• Closed cell non absorbent
• Resistance point to point,...5x10⁵ OHMS
• Charge decay time, 5000 Volts to 100 Volts....<0.01 seconds

This product will benefit your company through:

• Promoting employee wellness
• Immediate increase in productivity and employee morale due to work place comfort
• Reducing spinal compression, increases circulation
• Non-allergenic, latex and silicone free
• Complete with safety bevel

Custom shapes and sizes are available if needed.  Please contact Indoff for further information on this product.

Light Weight Coil Cord

The Botron light weight is designed with porabilty in mind. The leight weight coil cord is built for extended use and withstanding the labors of the work environment. It can be used in many applications from bench to personal grounding. It’s non-tangle and high retention coil make this a great choice for a hassle free path to ground.

Features:

• Black light weight coil cords in 6′ and 12′ lengths
• 30 Lb. tensile strength
• Spring contact banana connector
• 1/8″ (4mm) socket
• 1 Meg Ohm resistor
• Custom configurations available

Please contact Indoff for further information.