Resistance, Resistivity, Reassurance.

The ELITE, defined clearly as luxury.

VTR Technology
The ELITE, using Variable Test Resistance technology, is the most accurate tester on the market. Each unit is embedded with our VTR software calibration system that reads to the thousandth of a resistance decade. Being hard-coded means no screw drivers, dip switches or default test to get within OEM spec. The ELITE saves you time. VTR allows us to simply flash each ELITE to spec. No more sending testers back to the manufacturer and having to pull out some back up tester while you wait for what can be weeks for factory calibration. The ELITE brings an end to down time.

Customization at your finger tips.
With other ESD testers on the market you’re stuck with factory test settings. Unfortunatly, not every facility has the same test requirments. With the VTR system however, you can time in your own test settings for both footwear and wrist straps. Test ranges for footwear can be taylored anywhere from 500k - 1000k Lo and 1.0M - 1.3G Hi, while wrist straps can be customized within the range of 500k - 1000k Lo and 1.0M - 50M Hi.

Results that show.
All ELITE models come standard with a large 128×64 back lit LCD. That’s about 3 times larger than any other tester in the industry. With a larger LCD the ELITE can display comfortably, the date, time, relative humidity, temperature, and most importantly the actual test resistance for wrist straps and both right and left feet on screen.


The ELITE doesn’t stop there, however. The ELITE’s built in VTR technology displays a threshold graph that visually informs the worker of where their test results place within the allowable test parameters. This allows the worker to monitor their ESD heel grounds and wrist straps from test to test and first, predict and then prevent failures.

One of the many draw backs of “on-demand” testers is really not knowing for certain the factory calibration settings. With the ELITE and it’s VTR technology you do not have to refer to the data spec sheet. Whether you are auditor, supervisor, or metrology the ELITE will display calibration specifications and custom test parameters on screen.

 

Accuracy and reliability every test.
With the ELITE testing at 30 volts is a precaution we took to avoid inaccurate tests that plague almost all ESD testers on the market today.

There is a wide range of benefits that come with using a 30 volt test. So this is why we made 30v standard on all ELITE models. Do you really know how accurate your current tester is or what voltage it is testing at? Chances are its only sending out 9v and in that case it’s not all that consistent.

While 9v is fine for ESD wrist straps it is shaky at best for ESD shoes and heel grounders. What happens is dirt and other contaminates build up over usage and cause the resistance to go up. In the case of ESD shoes, resistance can be upwards of 1GIg. Therefor, 9v is more like 2v and no longer is a strong enough current to preform a accurate test. At a 1Gig load the ELITE will easily cut through the increased resistance and preform tests safely above 18 volts.

Optional Footplate with stand is available to mount tester as stand alone unit.

© 2006–2009 Botron dot Com

Paperless recorder measures temperature, humidity plus calculates dew point

Internal memory records up to 49,000 data points

Unit features audible and visual alarms with hi/low setpoints

Use this digital recorder to monitor and record temperature and humidity data in laboratories, storage and clean rooms, freezers, and other critical areas. Detachable probe extends up to one meter for measurements in closed environments and large dual graphical LCD display provides adjustable vertical and horizontal TAC resolution. Time, date and the percentage of memory remaining is displayed and audible and visual alarms generate warnings when conditions are outside required limits. Unit is desk or wall mountable and internal data records can be transferred to a PC via RS-232 serial port for further analysis.
Built-in stand, detachable probe with 3-ft cable, RS232 cable and 3 AA batteries are included. AC adapter is optional.

DC Relay Module, Replacement Probe & 3rd Party Calibration are also available

Testing range from 5 to 90% RH at uncertainties as low as (K=2) ±0.59% RH.

Testing at three points: 30, 60, and 80% RH with one temperature point at ambient (22 to 25C).

Calibration reports issued by InnoCal may not be reproduced, except in full, without written permission of InnoCal. The results stated in our reports relate only to the items tested or calibrated. Measurements reported on our reports are traceable to SI units via national standards maintained by NIST and are performed in compliance with MIL-STD-45662A, ANSI/NCSL Z540-1-1994, 10CFR50, Appendix B, ISO9002-94, and ISO/IEC 17025:2005.

Our highly-trained technicians provide NIST-traceable accredited humidity
calibrations using Condensation Chilled Mirror Hygrometer technology in
a dedicated environmental chamber.

CasterBooties™ESD are specially created to be installed through the caster horn.  Each CasterBootie™ESD is quick to install and provides quiet and easy unrestricted use of operation.  Whether rigid or swivel, Booties provide protection against scratching, scraping & scarring of any floor surface. (Not recommended for casters with braking mechanism.)

CasterBootiesESD™ are made of durable, waterproof and washable white static dissipative treated material. They can be machine washed with cold water and line dried for multiple uses. The white color will let you know when it is time to clean, in order to assure properly grounded conditions.

Sizes are available wheels 2" to 12". Please specify your caster width.

Priced per case. 2 dozen per case UPSable

Replacement Probe to be used with Extech RH520 series monitor.

StatCare Floor Paint is highly durable to the labors of the work environment. When properly applied it povides a safe work area that elimnates static charge. 

Two part water based epoxy floor paint. Will outlast all urethane paints to give your floors years of static protection. This durable and dissipative (RTT <10e8) paint is easy to apply, with an approximate coverage of 300-400 Sq. Ft. per Gallon.

Available in 4 Gallon cases and 5 gallon pails.

Colors: Light Grey, Medium Grey, Tan and Beige.

Botron’s ESD striped tape is a 2 Mil transparent cellulose with fast charge decay times. Available with printed blue, green, yellow and red stripes. 

Botron’s printed anti static tape is perfect for sealing ESD bags and ESD packing containers. It can also be used for a wide range of workstation applications such as binding, edging and securing.

Carton quantities only. (48 per carton)

Fob AZ

Botron’s ESD striped tape is a 2 Mil transparent cellulose with fast charge decay times. Available with printed blue, green, yellow and red stripes.

Botron’s printed anti static tape is perfect for sealing ESD bags and ESD packing containers. It can also be used for a wide range of workstation applications such as binding, edging and securing.

Carton quantities only. (72 per carton)

Fob AZ