30" x 48" Concept Work Station Frame, height adjustable 26.62" - 44.34", 1100 lbs. capacity

30"X48" ESD Grey Laminate Postformed Worksurface w/180 degree front comfort edge

Slotted frame, M36, 36" spacing, 53" height (single bay)

Light / Balancer rail, front mount, M36, 2ea 36" tracks

Tool balancer  1.5 - 3.0 Lbs cap

Clamp for Luxo and Dazor style lamps (pin mount)

Task lamp white with 33" arm, 24” x 4.3” head w/ 3 x 14w bulbs. Pin mount requires p/n 14-9500039 to attach to upright.

ESD adjustable shelf, M36, 20"X34"

2 M36, suspension rail

6 ESD Stacking Bin - BLACK - 9.84"Dx5.86"Wx5.11"H O.D.

8 ESD Stacking Bin - BLACK - 6.49"Dx4.13"Wx2.95"H O.D.

Foot rest, free standing, fixed height

ESD work surface available.  

14-9684110 grey laminate, 14-9703510 ESD grey laminate

FOB GA

30" x 60" Concept Handcrank Frame, adj  26.82"-40.60", 500 lbs. capacity

30"X60" Grey Laminate Postformed Worksurface w/180 degree front comfort edge

Slotted frame, 3M20, 3X20" spacing, 53" height (triple bay)

Light / Balancer rail, front mount, 2M30 or 3XM20, 2 ea 60" tracks

Overhead light 42" housing, 2 bulb, magnetic ballast, economy

2 Metal back panel M20, 19.5"X16"

2 Adjustable shelf,Front Justified, M20 x 19.88", ESD

Document shelf, M20, 19.5"X10"

2 M20, suspension rail

3 ESD Stacking Bin - BLACK - 9.84"Dx5.86"Wx5.11"H O.D.

4 ESD Stacking Bin - BLACK - 6.49"Dx4.13"Wx2.95"H O.D.

Foot rest, free standing, fixed height

ESD worksurface available. 

14-9684111 grey laminate, 14-9703511 ESD grey laminate

FOB GA

24" X 60" Concept Motorized Frame, adj. 27.80"-43.55", 1100 lbs.capacity static, 660 lbs. dynamic

24"X60" Grey Laminate Postformed Worksurface w/180 degree front comfort edge

Slotted frame, 3M20, 3X20" spacing, 53" height (triple bay)

Light / Balancer rail, front mount, 2M30 or 3XM20, 2 ea 60" tracks

Overhead light 42" housing, 2 bulb, magnetic ballast, economy

Vertical mount 6 outlet power bar with clamp

2 Document shelf, M30, 28"X10"

2 M30, suspension rail

10 Stacking Bin - RED - 9.84"Dx5.86"Wx5.11"H O.D.

14 Stacking Bin - RED - 6.49"Dx4.13"Wx2.95"H O.D.

Foot rest, attaches to Support Bar, bar not included with Concept Manual Adjust, or TowerLine

ESD worksurface available.  

14-9684104 grey laminate, 14-9703504 ESD grey laminate

FOB GA

Basic workstation frame M36 x 70.86

24"X48" Grey Laminate Postformed Worksurface w/180 degree front comfort edge

Table top brackets, pair (132 Lbs. load capacity.)

M36, suspension rail

8 Stacking Bins - RED - 6.49"Dx4.13"Wx2.95"H O.D.

2 ESD adjustable shelf, M36, 20"X34"

Light / Balancer rail, front mount, M36, 2ea 36" tracks

ESD worksurface available. 

14-9684103 grey laminate, 14-9703503 ESD grey laminate

FOB GA

30" x 60" Concept Work Station Frame, height adjustable 26.62" - 44.34", 1100 lbs. capacity

30"X60" Grey Laminate Postformed Worksurface w/180 degree front comfort edge

Slotted frame, 2M30, 2X30" spacing, 53" height (double bay)

Drawer mounting bracket for 30" deep manual and hand crank style base unit

Drawer unit, 2X4.33", 13.78" wide, 1 lock

60" Attached footrest/accessory support bar

Foot rest, attaches to Support Bar, bar not included with Concept Manual Adjust, or TowerLine

Light / Balancer rail, front mount, 2M30 or 3XM20, 2 ea 60" tracks

Overhead light 54" housing, 2 bulb, electronic ballast, economy

2 ESD adjustable shelf, M30, 18"X28"

ESD worksace available. 

14_9684 grey laminate, 14-9703511 ESD grey laminate

FOB GA

Added HTML Table Resource (html + xhtml supported, properties: uri and table xpath)

Structures supported:

Resistance, Resistivity, Reassurance.

The ELITE, defined clearly as luxury.

 

VTR Technology
The ELITE, using Variable Test Resistance technology, is the most accurate tester on the market. Each unit is embedded with our VTR software calibration system that reads to the thousandth of a resistance decade. Being hard-coded means no screw drivers, dip switches or default test to get within OEM spec. The ELITE saves you time. VTR allows us to simply flash each ELITE to spec. No more sending testers back to the manufacturer and having to pull out some back up tester while you wait for what can be weeks for factory calibration. The ELITE brings an end to down time.

Customization at your finger tips.
With other ESD testers on the market you’re stuck with factory test settings. Unfortunatly, not every facility has the same test requirments. With the VTR system however, you can time in your own test settings for both footwear and wrist straps. Test ranges for footwear can be taylored anywhere from 500k - 1000k Lo and 1.0M - 1.3G Hi, while wrist straps can be customized within the range of 500k - 1000k Lo and 1.0M - 50M Hi.

Results that show.
All ELITE models come standard with a large 128×64 back lit LCD. That’s about 3 times larger than any other tester in the industry. With a larger LCD the ELITE can display comfortably, the date, time, relative humidity, temperature, and most importantly the actual test resistance for wrist straps and both right and left feet on screen.


The ELITE doesn’t stop there, however. The ELITE’s built in VTR technology displays a threshold graph that visually informs the worker of where their test results place within the allowable test parameters. This allows the worker to monitor their ESD heel grounds and wrist straps from test to test and first, predict and then prevent failures.

One of the many draw backs of “on-demand” testers is really not knowing for certain the factory calibration settings. With the ELITE and it’s VTR technology you do not have to refer to the data spec sheet. Whether you are auditor, supervisor, or metrology the ELITE will display calibration specifications and custom test parameters on screen.

 

Accuracy and reliability every test.
With the ELITE testing at 30 volts is a precaution we took to avoid inaccurate tests that plague almost all ESD testers on the market today.

There is a wide range of benefits that come with using a 30 volt test. So this is why we made 30v standard on all ELITE models. Do you really know how accurate your current tester is or what voltage it is testing at? Chances are its only sending out 9v and in that case it’s not all that consistent.

While 9v is fine for ESD wrist straps it is shaky at best for ESD shoes and heel grounders. What happens is dirt and other contaminates build up over usage and cause the resistance to go up. In the case of ESD shoes, resistance can be upwards of 1GIg. Therefor, 9v is more like 2v and no longer is a strong enough current to preform a accurate test. At a 1Gig load the ELITE will easily cut through the increased resistance and preform tests safely above 18 volts.