DC Alarm Relay Module

Item Number: EHSL124 DC Alarm Relay Module Catalog Image
DC Alarm Relay Module, 9-ft. cable for Extech RH520 series
$100.00EA

AC Adapter for Extech EH520 series

Item Number: EH147230 AC Adapter Catalog Image
220 VAC adapter to be used with EXTECH RH520 series Teperature/Humidity Monitor
$25.00EA

ANALOGUE AUDIT KIT

Item Number: B8563 Catalog Image

The Botron Auditing Test Kits come with all components needed to make tests on all surfaces accurate and simple.  All components are packaged in a high quality die cut foam lined case.  The B8563 Auditing Test Kits comply with the intent of ANSI/ESD Standard 4.1 for work surfaces and standard 7.1 floor materials.  The auditing meter tests surface to surface and surface to ground at 10 volts and 100 volts.  Two 5 lbs. weights, test leads, and cases are included.  Color-coded and number scales for easy verification of any surface.

Please contact Indoff for further information on this and other Botron Test Equipment products.

$1033.35EA

Deluxe Dual Test Station

Item Number: B8525 Catalog Image

This Botron dual test station is the state of the art design to test all types off footwear and heel grounders.  The dual tester lets you test both feet at the same time.  Test from 900k to 35 Mohegans @9volts.

This Station:
*Allows you to test both feet at the same time
*Features both left and right LEDs
*Has no cords on the floor
*Features molded foot plates
Please contact Indoff for further information on this and other Botron products.
$618.55EA

Combination Calibration Unit for Footwear & Wrist Testers

Item Number: B85503 Catalog Image

Botron B85503 calibration unit can test our wrist strap testers and footwear testers. See if the range falls within our units parameters.

Test Range:6680k-11meg & 680k-110meg

For further information on this and other Botron test equipment please contact Indoff.

$152.90EA

100V LED MEGOHM METER

Item Number: B8562 Catalog Image

Botron offers many types of hand held surface meters.  The new 100V B8562 is a ten light surface to surface(RTT) and surface to ground (RTG) tester.  With easy to use portableLED read-out 103-1012 ohms range.  Includes leads for surface to ground testing.

2.75"x5"x1", powered by 9 volt battery with case.

Also comes in audit kit B8562KIT.

For further information on this product as well as other Botron test equipment please contact Indoff.

$445.00EA

100V LED AUDIT KIT

Item Number: B8562KIT Catalog Image

This new LED low cost 100 volt megohm test kit comes with B8562 LED megohm tester, molded case, two test leade and two 5 lbs weights.  Not only does it test with the 5 lbs. weights, but also with the two parallel probes on the back of the unit for quick testing.

Please contact Indoff for further information on this and other Botron auditing products.

$635.00EA

Digital & Analogue Audit Kit with cover

Item Number: B8572 Catalog Image

Digital & Analogue test kit makes testing all surface accurate and simple. Test up to 200G ohms/500v. Kit comes with two 5lb weights and foam filled case. Test at 10v,100v & 500volts.This unit can test to NFPA77 when many others can not.

ASK ABOUT OUR 3 YEAR WARRANTY

For further information on this and other Botron Test Equipment please contact Indoff.

$1281.00EA

Botron ELITE Complete Tester

Item Number: B88000 Catalog Image

Resistance, Resistivity, Reassurance.

The ELITE, defined clearly as luxury.

ELITE ESD Tester
This completely programmable unit includes software, I/O port, laser scanner. imbedded Ethernet Adapter and keypad that will allow you to have a complete track log of all tests performed by the system. 
vtr 
VTR Technology
The ELITE, using Variable Test Resistance technology, is the most accurate tester on the market. Each unit is embedded with our VTR software calibration system that reads to the thousandth of a resistance decade. Being hard-coded means no screw drivers, dip switches or default test to get within OEM spec. The ELITE saves you time. VTR allows us to simply flash each ELITE to spec. No more sending testers back to the manufacturer and having to pull out some back up tester while you wait for what can be weeks for factory calibration. The ELITE brings an end to down time.

Customization at your finger tips.
With other ESD testers on the market you’re stuck with factory test settings. Unfortunatly, not every facility has the same test requirments. With the VTR system however, you can time in your own test settings for both footwear and wrist straps. Test ranges for footwear can be taylored anywhere from 500k - 1000k Lo and 1.0M - 1.3G Hi, while wrist straps can be customized within the range of 500k - 1000k Lo and 1.0M - 50M Hi.
ELITE ESD Tester
ELITE ESD Tester
Results that show.
All ELITE models come standard with a large 128×64 back lit LCD. That’s about 3 times larger than any other tester in the industry. With a larger LCD the ELITE can display comfortably, the date, time, relative humidity, temperature, and most importantly the actual test resistance for wrist straps and both right and left feet on screen.

test-threshold
The ELITE doesn’t stop there, however. The ELITE’s built in VTR technology displays a threshold graph that visually informs the worker of where their test results place within the allowable test parameters. This allows the worker to monitor their ESD heel grounds and wrist straps from test to test and first, predict and then prevent failures.

One of the many draw backs of “on-demand” testers is really not knowing for certain the factory calibration settings. With the ELITE and it’s VTR technology you do not have to refer to the data spec sheet. Whether you are auditor, supervisor, or metrology the ELITE will display calibration specifications and custom test parameters on screen.

 

Accuracy and reliability every test.
With the ELITE testing at 30 volts is a precaution we took to avoid inaccurate tests that plague almost all ESD testers on the market today.

There is a wide range of benefits that come with using a 30 volt test. So this is why we made 30v standard on all ELITE models. Do you really know how accurate your current tester is or what voltage it is testing at? Chances are its only sending out 9v and in that case it’s not all that consistent.

While 9v is fine for ESD wrist straps it is shaky at best for ESD shoes and heel grounders. What happens is dirt and other contaminates build up over usage and cause the resistance to go up. In the case of ESD shoes, resistance can be upwards of 1GIg. Therefor, 9v is more like 2v and no longer is a strong enough current to preform a accurate test. At a 1Gig load the ELITE will easily cut through the increased resistance and preform tests safely above 18 volts.
elite-logo
$3558.00EA

Botron Elite Basic Programmable Tester

Item Number: B89000 Catalog Image

Resistance, Resistivity, Reassurance.

The ELITE, defined clearly as luxury.

VTR Technology
The ELITE, using Variable Test Resistance technology, is the most accurate tester on the market. Each unit is embedded with our VTR software calibration system that reads to the thousandth of a resistance decade. Being hard-coded means no screw drivers, dip switches or default test to get within OEM spec. The ELITE saves you time. VTR allows us to simply flash each ELITE to spec. No more sending testers back to the manufacturer and having to pull out some back up tester while you wait for what can be weeks for factory calibration. The ELITE brings an end to down time.

Customization at your finger tips.
With other ESD testers on the market you’re stuck with factory test settings. Unfortunatly, not every facility has the same test requirments. With the VTR system however, you can time in your own test settings for both footwear and wrist straps. Test ranges for footwear can be taylored anywhere from 500k - 1000k Lo and 1.0M - 1.3G Hi, while wrist straps can be customized within the range of 500k - 1000k Lo and 1.0M - 50M Hi.

Results that show.
All ELITE models come standard with a large 128×64 back lit LCD. That’s about 3 times larger than any other tester in the industry. With a larger LCD the ELITE can display comfortably, the date, time, relative humidity, temperature, and most importantly the actual test resistance for wrist straps and both right and left feet on screen.

test-threshold
The ELITE doesn’t stop there, however. The ELITE’s built in VTR technology displays a threshold graph that visually informs the worker of where their test results place within the allowable test parameters. This allows the worker to monitor their ESD heel grounds and wrist straps from test to test and first, predict and then prevent failures.

One of the many draw backs of “on-demand” testers is really not knowing for certain the factory calibration settings. With the ELITE and it’s VTR technology you do not have to refer to the data spec sheet. Whether you are auditor, supervisor, or metrology the ELITE will display calibration specifications and custom test parameters on screen.

 

Accuracy and reliability every test.
With the ELITE testing at 30 volts is a precaution we took to avoid inaccurate tests that plague almost all ESD testers on the market today.

There is a wide range of benefits that come with using a 30 volt test. So this is why we made 30v standard on all ELITE models. Do you really know how accurate your current tester is or what voltage it is testing at? Chances are its only sending out 9v and in that case it’s not all that consistent.

While 9v is fine for ESD wrist straps it is shaky at best for ESD shoes and heel grounders. What happens is dirt and other contaminates build up over usage and cause the resistance to go up. In the case of ESD shoes, resistance can be upwards of 1GIg. Therefor, 9v is more like 2v and no longer is a strong enough current to preform a accurate test. At a 1Gig load the ELITE will easily cut through the increased resistance and preform tests safely above 18 volts.
Optional Footplate with stand is available to mount tester as stand alone unit.
elite-logo

© 2006–2009 Botron dot Com

$1042.00EA