Shoe Cleaner (Heavy Duty)

Item Number: 2010sc Catalog Image

The automatic sensor unit activates the shoe brush machine with the foot is placed in the opening. The unit incorporates a 99.99% efficient HEPA filter exhaust system that prevents particles from reentering the surrounding area and captures heavy contaminants in a convenient pull out drawer.

The unit is self contained with a built in vacuum system; a timing belt drive between the gear motor and bottom brush assembly.

- Totally enclosed fan cooled gear motor
- Round belt drive for the top brush
- Four motor driven brushes
- Floating, weight loaded, top brush
- Stainless steel base plate
- Dirty HEPA filter warning light
- Positive, easily adjustable time belt tension
- Easily removable dust drawer and contamination bag
- Easily removable filter
- Heavy duty construction
- Operating noise with blower, vacuum and gear motor is 55 dba
- Water resistant
- 7’ power cord
- 120v/60HZ
- 18 ½” x 28” x 39”
- 135 lbs. Ship weight

The 2010 SC unit comes with a special energy conserving switch that activates the unit. The motor shuts off automatically when the foot is removed from the unit. No other shoe cleaning machine available offer such power, cleaning ability and convenience.

Please contact Indoff for further information on this and other clean room products.


All-In-One Portable Tacky Mat

Item Number: 10-2100 Catalog Image

Liberty offers a portable entrance mat designed to remove small dirt particles and dust from shoes. When the top sheet is dirty, simply peel off and throw away. Refills are easy to install and available in 60 sheets. Frame and mat have a total thickness of 1/4". Frame is constructed of ehite hi-impact polystyrene w/ a non slip backing adhered to the back of the frame. This makes it easy to use the product in and application and can easily be picked up and moved. The mat size is 24"x30".

Replacement Sheets also available on this site.


Please contact Indoff for further information on this and other Clean Room products.


Tacky Mat

Item Number: 800030FW Catalog Image

Get maximum protection with the Tacky Mat for foot borne contamination. Each sheet has a strong adhesive coating that removes dirt on contact. The 10-7005 provides the most economical way to meet cleanroom needs.

Several years ago, Eastman-Kodak performed a study on the efficacy of Tacky Mats® and found that a person stepping one time on a Tacky Mat® will remove approximately 55% of the friable, or potentially airborne, particulates from the bottom of the shoe. If the individual steps on the Tacky Mat® five times, as much as 95% of the friable particulate will be removed.

This product protects sanitary conditions in cleanroom areas. Each mat consists of 30 disposable sheets. When the top sheet becomes soiled, simply peel off to expose a new, clean surface. Tacky Mat® installs in seconds and can last up to weeks at a time depending on the amount of traffic. No frame is required; adhesive strips stick or full width backing adhere the Tacky Mat® in place on the floor.

Tacky Mats® are specified in a variety of applications, including semiconductors, nuclear, pharmaceutical, electronic devices, computer, aerospace, biotechnology, laser optics, medical devices, plastic/rubber, automotive, defense contractors, food processing, biologicals, university laboratories and hospitals.

Tacky Mats® are available in a variety of sizes (up to 3' x 5') and colors. Mats may be either 30 sheets per mat or 60 sheets per mat and are shipped as either 120 or 240 sheets per case.

Tacky Mat® is a registered trademark of LIBERTY INDUSTRIES.

Other sizes and colors available, please contact Indoff for further information on this other clean room products.



ESD Ortho Mat

Item Number: ESD Ortho Mat Catalog Image

This product was designed for protection against Electro-Static Discharge.   The rubber mat is conductive for a rapid discharge to ground.  These anti-fatigue mats are scientifically and ergonomically designed to reduce strains, pains, and worker's compensation claims related to prolonged standing.

These private label Ortho ESD mats are of the highest quality in the industry.  These mats will deliver increased efficiency and reduce injury.  This orthopedic wonder is a high performance mat for higher performance stand up workers.

This mat features:

  • Closed cell non absorbent
  • Resistance point to point,...5x105 OHMS
  • Charge decay time, 5000 Volts to 100 Volts....<0.01 seconds

This product will benefit your company through:

  • Promoting employee wellness
  • Immediate increase in productivity and employee morale due to work place comfort
  • Reducing spinal compression, increases circulation
  • Non-allergenic, latex and silicone free
  • Complete with safety bevel

Custom shapes and sizes are available if needed.  Please contact Indoff for further information on this product.


Cleanstat Spray Buff

Item Number: Cleanstat Spray Buff Catalog Image

Indoff and Botron recommend that you develop a floor care program.  A very important part of a static control floor program is to use Spray Buffing to remove marks and keep your floor in a dissipative range.  Heavy to moderate areas should be done weekly.  It not only improves your dissipative properties, but gives you a high gloss.

*Never Spray a dirty floor*
Please contact Indoff with any further questions on this and other Botron floor care products.

Cleanstat ESD Floor Finish

Item Number: Cleanstat ESD Floor Finish Catalog Image

Cleanstat ESD Static dissipative floor finish prevents static charge generation.  It will dissipate a charge from a person as they walk around the plant with the proper foot grounding device (heel grounders).  This product is ideal when mobility is needed.

*Be Sure to always use a clean mop and bucket when installing ESD Flor Finish*
Please contact Indoff for further information on this and other Botron floor care products.

Cleanstat ESD Floor Cleaner

Item Number: Cleanstat ESD Floor Cleaner Catalog Image

Botron recommends their B8300 series Cleanstat concentrated floor cleaner.  This concentrated floor cleaner will rejuvenate and improve your static dissipative floor system.  It will improve other types of floor surfaces, like tile and epoxy.  Coverage when diluted 10-1 ratio is over 2000 sqft.

Please call Indoff for further information on this and other Botron Floor Care products.

Comfort Matta Closed Config

Item Number: CMCB1

Closed Mat closedmatta

Comfort Matta safety surfacing provides a safe and comfortable standing work surface.  This system minimizes the health hazards, such as foot and leg muscle strain, back pain, varicose minimizes, and fatigue associated with standing on hard cold surfaces.

  • Excellent ergonomic and anti-fatigue qualities
  • Easy to Clean
  • Unique interlocking design
  • Rugged and durable construction designed for the commercial and industrial workplace
  • Safety Yellow edge ramps and mitered.
  • Available closed configurations
  • Comfort Matta is suitable for use in temperatures ranging from -22°F to 184ºF

Comfort Matta Closed can be used for any dry application from in front of workbenches and presses, to assembly lines as long as football fields.  Comfort Matta is easily installed, and provides unsurpassed comfort and durability making it a sound investment for years to come.

Product Specifications:

  • Product:CMCB1
  • Dimensions:20"x20"
  • Thickness: 1"
  • Weight 7.7 lbs
  • Color: Black
  • Material: PVC
  • Shore Hardness: 78
  • Temperature Variation:-22º TO 140ºF
  • Interlocking Connection: 5 Lug
  • Average Coefficient of Friction ASTM E303-93 (Reproved 1998):35 Wet/ 35 Dry
  • ADA Compliance ASTM F 1951-99: 78
  • Ultra Violet Stabilized: Yes
  • Fire Exposure Test: PASSED 
  • Case Quantity 10/Case

Please contact Indoff for further information on this and other Milagon matting products.


Static Dissipative 2-Part Epoxy Floor Paint

Item Number: ESD Floor Paint Catalog Image

StatCare Floor Paint is highly durable to the labors of the work environment. When properly applied it povides a safe work area that elimnates static charge. 

Two part water based epoxy floor paint. Will outlast all urethane paints to give your floors years of static protection. This durable and dissipative (RTT <10e8) paint is easy to apply, with an approximate coverage of 300-400 Sq. Ft. per Gallon.

Available in 4 Gallon cases and 5 gallon pails.

Colors: Light Grey, Medium Grey, Tan and Beige.


Bull Dog Shoe Cleaner (Industrial Heavy Duty)

Item Number: 20-2340 Catalog Image

This unit is specifically designed to clean shoes where employees or visitors enter into your office, warehouse, or work area directly from outside or from a dirty work area.  The unit  is designed to handle all types of dirt such as mud, leaves, grass clippings, slush or sand.  Used properly the Bull Dog could significantly reduce your annual maintenance costs for high traffic areas where dirt is a concern and will enable you to protect your expensive floors and carpets from damage.  Unit must be placed indoors in a hall or entryway.  The unit cannot be placed outside; meant for indoor use only. 

-    Designed for cleaning large construction boots and shoes.
-    ¼ horsepower 115V/60hz single phase motor
-    Total power requirement including vacuum is 12.4 amps
-    Shoe Brush (5.4 amps) Vacuum (7.0 amps)
-    System protected by a 15-amp breaker
-    16 gauge stainless steel housing
-    A user operated push button switch turns on the machine when depressed  and shuts the system down when released.  The vacuum should be plugged directly into the Bull Dog and will be activated when push button is used.
-    Shafts are carbon steel electroless nickel-plated design to reduce corrosion
-    Easy installation, plug into a standard 115V/60hz single phase outlet
-    Rotating heavy duty nylon brushes for cleaning (non abrasive)
-    User can perform preventative maintenance
-    System comes with a 6’ power cord ready to plug in
-    Size: 16”Wx21”Lx44”H
-    Unit is shipped with Operations Manual and complete parts list
-    Warranty: One year from date of invoice against defective workmanship and all parts except belts and brushes


Option #1  #AS-10 Hepa Vacuum (includes one bag)
........add$ 715.00 each
(Item code: 20-2409     one week lead time)

Option #2  #610W Wet/Dry Vacuum with hose, Non-Hepa....add$ 732.00 each 

(Item code: 20-2344 four week lead time)